Chemours FAQ: Plant Locations, Logos, Roof Coatings, and Titanium Dioxide—A Buyer's Notes

If you've been tasked with sourcing coatings, pigments, or specialty chemicals, you've probably seen the Chemours name and wondered what it actually covers. I'm an office administrator handling purchases for a 200-person property management company, and over the past five years I've ordered roof coatings, arranged powder coating work, and even answered questions about makeup ingredients for our HR team (long story). Here are the Chemours-related questions I keep coming back to, with the answers I've verified from experience and current sources.

What does Chemours actually make?

Chemours is a chemical company spun off from DuPont in 2015. They produce fluoroproducts (including Teflon fluoropolymers), titanium dioxide pigments under the Ti-Pure brand, and a range of specialty chemicals used in refrigerants, electronics, and coatings. If you're buying a roof coating, you might be encountering their white pigment or a fluoropolymer additive. If you're sourcing powder coating, Chemours' FEP or PFA resins can show up in high-performance specs. As of January 2025, the company's website (chemours.com) lists four segments: Titanium Technologies, Thermal & Specialized Solutions, Advanced Performance Materials, and Chemical Solutions. That's a useful starting point if you need to verify a product claim.

Where is the Chemours chemical plant located?

Chemours doesn't have a single plant—it operates facilities in the U.S. and internationally. The ones I see most often in sourcing documents are the titanium dioxide plants in New Johnsonville, Tennessee; and Altamira, Mexico; plus the Fayetteville, North Carolina, site for fluorochemicals. There's also a plant in Dordrecht, Netherlands, and others. I learned the hard way that "made at a Chemours plant" doesn't mean one location. When you're reviewing a supply chain, ask for the specific manufacturing site. It affects freight costs and environmental compliance expectations (we once had a $2,400 freight estimate change because I assumed a different origin).

What is the Chemours logo, and why should a buyer care?

The Chemours logo is a wordmark with a stylized "C" and a small orange swoosh—modern, clean, not the old lab-beaker look. I didn't think the logo mattered until a mislabeled shipment in 2023 changed my mind. We ordered what we thought was a genuine Chemours product, but the drums had a slightly off-color logo and no lot traceability. The vendor couldn't produce an SDS from the manufacturer. It turned out to be an unauthorized repack. Now I always ask for a photo of the product label and check for the Chemours logo, batch codes, and country of origin before placing a big order. Legitimate packaging includes all of those. If the label looks improvised, verify before you pay.

Is Apoc roof coating a Chemours product?

No, Apoc is a separate brand of roof coatings and repair products—not produced by Chemours. That said, the two can overlap in your supply chain. Some Apoc formulations might contain titanium dioxide from companies like Chemours, but that doesn't make Apoc a Chemours product. If you're evaluating roof coatings, look at the actual spec: elongation, UV resistance, weatherability. We've used Apoc on flat commercial roofs and it performed fairly well, but our situation was a mid-sized building with moderate foot traffic. If you're handling a critical roof with severe weather exposure, you may need a heavier coating. Always check the product data sheet, not just the brand name, and ask the supplier for the manufacturer's SDS.

How do I pick a powder coating service in Washington DC?

We've sourced powder coating for metal furniture and railings around DC, and I've developed a few rules. Get three written quotes and ask each finisher about pre-treatment (not just the color), cure cycle, and film thickness guarantee. In Q4 2024, we went with the first shop that could fit us in, and the coating chipped within two months. The second shop used a zinc phosphate pre-treatment and a fluoropolymer powder, and the finish held up much better. So now I pay for the spec, not the promise. Ask for a sample coupon before large runs—that's the only way to verify adhesion. I can only speak to commercial buildings in the Mid-Atlantic region, though; industrial powder coating for heavy manufacturing might have different requirements.

What is titanium dioxide in makeup?

If you're in procurement, you might get this question from HR or a client. Titanium dioxide (TiO2) is a white pigment and UV filter. In makeup, it provides opacity in foundations and acts as a physical sunscreen ingredient. It's been used for decades, and the FDA permits it as a color additive (21 CFR 73.575) and as a sunscreen active ingredient (21 CFR 352.10), as of January 2025. Not all TiO2 is the same. Chemours sells pigment-grade TiO2 for industrial use, but cosmetic-grade material has to meet different purity and particle size standards. So if you're buying makeup ingredients, you need cosmetic-grade certification, not a generic TiO2 bag. (Mental note: I keep a copy of the FDA citation in our compliance folder.)

What's the most common mistake when buying Chemours products?

The most common mistake I've hit in five years of buying coatings and pigments is skipping the SDS. The Safety Data Sheet tells you the exact product name, hazard warnings, and manufacturer contact info. It took me three years and one rejected expense report to understand that. A vendor who can't produce an SDS on request is a red flag. Also, keep your own files. In 2024, I consolidated our chemical vendor list from six down to three, and having complete SDS and certificates of analysis made that process easier. We cut our ordering turnaround from 5 days to 2 days. That said, that's my context—a property management office. If you're in heavy manufacturing, your purity and logistics requirements are probably different.